Servo rotary riveter, consulting Beayta, complete models, adapt to different needs of the scene, product saving environmental protection, reliable quality, the benefits to the real want you.

Servo rotary riveting machine is a new type of precision rotary riveting equipment, which has been widely used in automobile manufacturing industry. It has the advantages of high precision, high speed, simple operation and good stability, and is an ideal choice to replace the traditional riveting machine equipment. Before installing the rotary riveting die, the die needs to be cleaned. After cleaning, install and adjust the fixed screw. Do not disassemble the riveting die repeatedly.After the mold is installed, it is necessary to carry out a debugging, and stipulate the diameter and length of the rivet. Manually operated valve should be opened before starting to adjust the pressure to meet the technical requirements in order to achieve better riveting effect.Check whether the material is in accordance with the bill of materials, and then proceed to operate. Insert the rivets into the collet, then lift the collet, after the rivets are inserted into the setting holes, the rivet can be automatically started. Do not insert too much force in the process of riveting, so as not to affect the riveting effect.

The machine also needs to be well maintained, the machine maintenance work should be done after proper use, the chuck needs to be cleaned and oiled in time, pay attention to cleaning the machine after work every day, and oil maintenance in all parts of the machine, pay attention to air fluctuations on weekdays, so as not to damage the key machine.In the use of the process, if the machine failure should be quickly stopped, check the cause of the fault, if it is a normal fault, you can deal with it yourself, if the reason is unknown, the machine needs to be sent back to the manufacturer for inspection and repair.

Servo rotary riveting press is a kind of riveting equipment with high efficiency and high precision. Its operation is simple and its stability is good. The advantages of easy maintenance have been widely recognized.The use of servo rotary riveting press requires practice operation methods, pay attention to machine maintenance and troubleshooting, so as to better play its riveting effect.

The high precision characteristics of realizing accurate pressure and displacement full closed-loop control are unmatched by other types of presses. Compared with the traditional pneumatic, the effect of energy saving is more than 80%, and more environmentally friendly, safe, can meet the requirements of the use of equipment in the dust-free workshop, pressure and displacement of the whole process of the curve can be displayed on the LCD touch screen;The whole process control can automatically determine whether the product is qualified at any stage of the operation, and remove 100% of the defective products in real time, so as to realize online quality management. Press-fit force, press-fit depth, press-fit speed, holding time and so on can all be inputted in the operation class, with friendly interface and simple operation.Since the machine itself has mental pressure and displacement control functions, there is no need to add a hard limit on the tooling, and only need to call different press assembly procedures when processing products of different specifications, so it is easy to achieve a multi-purpose machine and flexible assembly line.

Compared with the traditional type of pressure riveting machine, servo pressure riveting machine has the following advantages:

(1) Increase productivity. The stroke length can be set to the minimum value necessary for production. The forming speed suitable for the processing content can be maintained.

(2) high precision products. Through closed-loop feedback control, the accuracy of BDC is always guaranteed. Restrain the burr of the product and prevent the production of defective products.

(3) Low noise and long mold life. By means of a low noise mode (i.e., reducing the contact speed between the slider and the sheet metal), the noise is greatly reduced compared to general mechanical presses. And the vibration of the mold is small, long life.

(4) Controllability of slider movement. The user can make use of this feature to work out the slide motion mode suitable for the processing technology. Effectively improve the accuracy and stability of the product, improve mold life and productivity, and can achieve silent blanking, and even expand the processing range (such as magnesium alloy stamping, etc.), suitable for blanking, deep drawing, stamping and bending Process, as well as the characteristic curve of different materials. If the slider can be run to stop holding pressure, the purpose is to improve the forming quality of the workpiece.

(5) Energy saving and environmental protection. Canceling the traditional mechanical press flywheel, clutch and other energy-consuming components, reducing the drive parts, simplifying the mechanical transmission structure; Less lubricating oil, stroke controllable; Due to the low power consumption, the operating costs are also significantly reduced.

On April 26, 2024, BEATE servo rotary riveting machine is ready for shipment, from disassembly - packaging - freight - automatic door installation and commissioning, Maintain the service in the end, quality first, service first, riveting machine is a key industrial equipment, in order to ensure the safety of the operator and the normal operation of the equipment, must comply with safe operation procedures, proper maintenance of equipment, to ensure the smooth progress of production.At the same time, at any time, keep alert, do a good job in the prevention of accidents, to ensure infringement, efficient production. Suzhou Beayta Precision Automation Machinery Co., Ltd. is showing its light to the world.